{"id":23087,"date":"2026-10-09T20:11:59","date_gmt":"2026-10-09T17:11:59","guid":{"rendered":"https:\/\/avloon.com\/product\/creality-sermoon-p1s-3d-scanner\/"},"modified":"2026-10-29T23:51:52","modified_gmt":"2026-10-29T20:51:52","slug":"creality-sermoon-p1s-3d-scanner","status":"publish","type":"product","link":"https:\/\/avloon.com\/en\/product\/creality-sermoon-p1s-3d-scanner\/","title":{"rendered":"Creality Sermoon P1S All-in-One Handheld 3D Scanner with Built-in Screen and Processor"},"content":{"rendered":"
\n

Creality Sermoon P1S<\/strong> is an all-in-one handheld 3D scanner from Creality that scans your part, processes it and shows it on its own screen without a computer, thanks to an octa-core Qualcomm processor, 16GB of memory and a built-in 6-inch touchscreen. The Creality Sermoon P1S scanner combines a blue laser with 34 cross lines, 7 parallel lines and a single line with near-infrared (NIR) structured light, reaching accuracy up to 0.02 mm with the blue laser and 0.075 mm with NIR light, so it scans everything from a 5 mm part to objects up to 4 meters long. A practical choice for reverse engineering, car customization, digital design and 3D printing.<\/p>\n

Sermoon P1S Scanner Highlights<\/h2>\n
    \n
  • Scanning and processing on the device, no computer needed: an octa-core Qualcomm processor up to 3.36 GHz and 16GB of memory, and you bring in a computer to export the model to other software and for markerless scanning.<\/li>\n
  • Four light patterns in one device: 34 blue laser cross lines for large areas, 7 parallel lines for fine detail, a single line for holes and recesses, and NIR light for faces and bodies.<\/li>\n
  • Precise measurements for reverse engineering: accuracy up to 0.02 mm and volumetric accuracy of 0.02 mm + 0.08 mm\/m with the blue laser (under lab conditions).<\/li>\n
  • Flexible with three working modes: standalone at up to 60 FPS, wireless with a computer over Wi\u2011Fi 7, or wired over USB 3.0 at up to 100 FPS (with the blue laser, depending on the part and the computer's specs).<\/li>\n
  • Watch the scan in real time on a 6-inch HD touchscreen in standalone mode, and complete merging, alignment, meshing and model coloring right on it.<\/li>\n
  • Less need for scanning spray: the blue laser captures many dark and metallic surfaces, and for very black or very shiny parts, a light coat of spray does the job.<\/li>\n
  • Outdoor scanning in shaded and semi-open spaces: the blue laser up to 110,000 lux, and NIR light up to 80,000 lux with the two included NIR filters, at operating temperatures up to 40\u00b0C.<\/li>\n
  • Swap the battery and keep scanning: two swappable 3,300 mAh batteries, each lasting about 2 hours, recharge quickly with a PD3.0 charger.<\/li>\n
  • From small 5 mm parts to large objects up to 4 meters, all in one device.<\/li>\n<\/ul>\n

    What's in the Box<\/h2>\n
      \n
    • Creality Sermoon P1S scanner \u00d7 1<\/li>\n
    • High-precision glass calibration board \u00d7 1<\/li>\n
    • Marker blocks \u00d7 6<\/li>\n
    • USB 3.0 data cable, Type\u2011C on both ends, 2 m (for computer and charger) \u00d7 1<\/li>\n
    • Adhesive reflective markers, 6 mm and 3 mm diameter \u00d7 20<\/li>\n
    • Spare battery \u00d7 1 (giving you two 3,300 mAh batteries)<\/li>\n
    • Lanyard \u00d7 1<\/li>\n
    • Cleaning cloth \u00d7 1<\/li>\n
    • NIR filter \u00d7 2<\/li>\n
    • Quick start guide, certificate of conformity and warranty card \u00d7 1<\/li>\n<\/ul>\n

      Technical Specifications<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
      Device Type<\/td>\nAll-in-one handheld 3D scanner with built-in processor and screen (blue laser + NIR structured light)<\/td>\n<\/tr>\n
      Light Sources<\/td>\n34 blue laser cross lines + 7 parallel lines + single line, plus near-infrared (NIR) structured light<\/td>\n<\/tr>\n
      Accuracy<\/td>\nUp to 0.02 mm with the blue laser, and up to 0.075 mm with NIR light<\/td>\n<\/tr>\n
      Volumetric Accuracy<\/td>\n0.02 mm + 0.08 mm\/m with the blue laser, and 0.075 mm + 0.1 mm\/m with NIR light (under lab conditions, according to Creality)<\/td>\n<\/tr>\n
      Frame Rate<\/td>\nStandalone mode: up to 60 FPS with the blue laser and 20 FPS with NIR light; with a computer: up to 100 FPS with the blue laser and 30 FPS with NIR light (depending on the part and the computer's specs, highest over a wired connection)<\/td>\n<\/tr>\n
      Capture Speed<\/td>\nStandalone mode: up to 1,224,000 points\/s with the cross laser and 4,587,000 points\/s with NIR light; with a computer: up to 1,836,000 and 6,881,000 points\/s<\/td>\n<\/tr>\n
      Point Spacing<\/td>\n0.05\u20132 mm with the blue laser, and 0.1\u20132 mm with NIR light<\/td>\n<\/tr>\n
      Object Sizes<\/td>\nFrom 5 \u00d7 5 \u00d7 5 mm to 4,000 \u00d7 4,000 \u00d7 4,000 mm (the smallest size with NIR light is 150 \u00d7 150 \u00d7 150 mm)<\/td>\n<\/tr>\n
      Working Distance<\/td>\nSingle line and cross lines 200\u2013550 mm, parallel lines 160\u2013400 mm, and NIR light 170\u20131,200 mm<\/td>\n<\/tr>\n
      Single-Frame Capture Area<\/td>\nWith the blue laser, 100 \u00d7 128 mm at 160 mm and 500 \u00d7 400 mm at 550 mm; with NIR light, 160 \u00d7 130 mm at 170 mm and 975 \u00d7 725 mm at 1,000 mm<\/td>\n<\/tr>\n
      Alignment Modes<\/td>\nBlue laser: markers, global markers, or markerless (with a computer over cable only); NIR light: geometry or texture<\/td>\n<\/tr>\n
      Cameras and Color Scanning<\/td>\nTwo 3D scanning cameras and an RGB camera to capture the part's colors, with 8 white LED fill lights for color and 8 blue LEDs for marker recognition<\/td>\n<\/tr>\n
      Outdoor Scanning<\/td>\nIn shaded and semi-open spaces: the blue laser in light up to 110,000 lux, and NIR light up to 80,000 lux with the two included NIR filters and 50,000 lux without them<\/td>\n<\/tr>\n
      Laser Class<\/td>\nBlue laser Class II and NIR light Class I, both rated eye-safe by Creality; even so, never aim the laser directly at the eyes, and for face and body scanning use NIR mode as Creality recommends<\/td>\n<\/tr>\n
      Processor<\/td>\nQualcomm octa-core up to 3.36 GHz + Adreno 740 GPU + FPGA<\/td>\n<\/tr>\n
      Memory and Storage<\/td>\n16GB LPDDR5X \/ 256GB UFS 4.0<\/td>\n<\/tr>\n
      Display<\/strong><\/td>\n6-inch HD touchscreen (shows the scan live in standalone mode)<\/td>\n<\/tr>\n
      Working Modes<\/td>\nStandalone \/ wireless with a computer \/ wired with a computer<\/td>\n<\/tr>\n
      Connectivity<\/strong><\/td>\nUSB Type\u2011C port (USB 3.0), and wired mode needs a USB\u2011C port on the computer at USB 3.0 speed or higher; Wi\u2011Fi 7 through a hotspot from the device (the computer needs Wi\u2011Fi 6 or newer, within 5 m at most and ideally 3 m)<\/td>\n<\/tr>\n
      Software<\/strong><\/td>\nCrealityScan for Windows and macOS<\/td>\n<\/tr>\n
      Export Formats<\/td>\nSTL \/ 3MF \/ OBJ \/ PLY \/ ASC via CrealityScan on the computer (STEP\/STP isn't exported directly, so rebuild the model in reverse-engineering software for CAD)<\/td>\n<\/tr>\n
      Smart Processing<\/td>\nAI gap filling and texture regeneration, plus 3D Gaussian Splatting support for color projects (generated on a computer with an RTX 2060 card or higher)<\/td>\n<\/tr>\n
      Recommended Computer<\/td>\nWindows 10\/11 (64-bit) with a 13th-gen Intel Core i7 or newer, an RTX 4060 card with 8GB or higher and 32GB of memory; or macOS 14 or later with Apple M3 or newer and 32GB of memory<\/td>\n<\/tr>\n
      Minimum Computer<\/td>\nWindows 10\/11 (64-bit) with a 7th-gen Intel Core i7, an NVIDIA card with 6GB and 16GB of memory; or macOS 12 or later with Apple M2 and 16GB of memory<\/td>\n<\/tr>\n
      Battery<\/td>\nTwo swappable 3,300 mAh batteries (one is a spare), about 2 hours per battery; a full charge takes about 1.5 hours inside the device while it's off, or about 4 hours for the battery on its own, and you can scan while it charges in wired mode with a computer<\/td>\n<\/tr>\n
      Power<\/td>\nTwo swappable batteries that charge over USB-C PD3.0 \u2014 no voltage converter needed; the charger isn't included, and any USB-C PD charger rated 30W or more works with it<\/td>\n<\/tr>\n
      Operating Conditions<\/td>\n-10\u00b0C to 40\u00b0C, 10\u201390% humidity<\/td>\n<\/tr>\n
      Machine Dimensions<\/strong><\/td>\n209 \u00d7 129 \u00d7 53 mm<\/td>\n<\/tr>\n
      Weight<\/td>\n807 g with battery<\/td>\n<\/tr>\n
      Warranty<\/td>\nUp to 12 months from the manufacturer, Creality, on the device, and 3 months on wear parts such as the calibration board, excluding the reflective marker stickers<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

      FAQs<\/h2>\n

      Does the scanner need a computer to work?<\/h3>\n

      Not for scanning and processing: it scans your part and processes it on the device itself (merging, alignment, meshing and coloring). To move the model into slicing or design software, connect it to a computer by cable or through the device's hotspot, import the project into CrealityScan and export it. A computer also unlocks markerless scanning with the blue laser (by cable only) and a higher frame rate of up to 100 FPS with the blue laser over cable on a computer with the recommended specs, and it's the better choice for processing very large projects.<\/p>\n

      Is the charger included? And does it work on Saudi power?<\/h3>\n

      The charger isn't included; the box has a 2 m USB 3.0 cable with Type\u2011C on both ends that connects the device to a charger and to a computer, and Creality recommends a USB\u2011C charger supporting PD3.0 rated 30W or more. And yes, it works in Saudi Arabia with no voltage converter, because the device runs on its battery and connects to the charger only through its USB\u2011C port; just choose a charger with a plug that fits Saudi outlets.<\/p>\n

      Does it scan black and shiny surfaces without spray?<\/h3>\n

      The blue laser reduces the need for scanning spray on many dark and metallic surfaces. For very black or very shiny parts, use a suitable amount of scanning spray, and transparent and semi-transparent objects always need it.<\/p>\n

      Does it work outdoors and in daylight?<\/h3>\n

      Yes, in shaded and semi-open spaces within the official lighting limits: the blue laser up to 110,000 lux, and NIR light up to 80,000 lux once the two included NIR filters are fitted on the scanning cameras (50,000 lux without them). The operating temperature goes up to 40\u00b0C, so pick a shaded spot and avoid direct midday sun in summer.<\/p>\n

      Which formats does it export? And are they suitable for 3D printing?<\/h3>\n

      You export the model from CrealityScan on the computer as STL, 3MF, OBJ, PLY or ASC, so you can prepare an STL file for printing in your slicer, or import the file into reverse-engineering software such as QuickSurface and Geomagic Design X. It doesn't export STEP\/STP directly, so to get a CAD model you rebuild it in that software. CrealityScan is available for Windows and macOS.<\/p>\n

      Does it need the internet?<\/h3>\n

      Scanning doesn't need the internet. The first setup includes a network connection and device activation step, and a connection is also needed when updating the device's system.<\/p>\n

      Why choose the Creality Sermoon P1S from Avloon?<\/h2>\n

      Because it brings scanning, processing and a screen together in one device you carry to the part wherever it is, in the workshop, on site or in the office, and then you move your model to the computer to prepare it for 3D printing or build your design on it. If you have a question before ordering, message us. Order the Creality Sermoon P1S scanner from Avloon now<\/strong> and start turning your parts into digital models with accuracy up to 0.02 mm using the blue laser.<\/p>\n<\/div>","protected":false},"excerpt":{"rendered":"

      Creality Sermoon P1S Scanner<\/strong> is a handheld 3D scanner with a built-in processor and 6-inch touchscreen that scans and processes your part without a computer. It combines a blue laser with accuracy up to 0.02 mm and NIR structured light, with two swappable batteries.<\/p>","protected":false},"featured_media":23080,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"_avl_seo_title_en":"Creality Sermoon P1S Handheld 3D Scanner | Avloon","_avl_seo_desc_en":"All-in-one Creality Sermoon P1S 3D scanner with blue laser and NIR light, 0.02 mm accuracy, built-in processor and 6-inch screen, no computer needed.","_avl_en_ready":"1","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"product_cat":[723],"product_tag":[724,725],"class_list":["post-23087","product","type-product","status-publish","has-post-thumbnail","product_cat---3d","product_tag-724","product_tag-725","pa_brand-creality","first","instock","sale","taxable","shipping-taxable","purchasable","product-type-simple","rey-swatches",""],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t