Creality Falcon2 Pro 60W Laser — Enclosed Engraving and Cutting Machine for Wood and Acrylic

Creality Falcon2 Pro 60W Laser is a fully enclosed laser engraving and cutting machine designed for small workshops and commercial projects that need high cutting power and engraving precision in one machine. The 60W laser module cuts basswood up to 22 mm and black acrylic up to 30 mm in a single pass according to Creality, and the box also includes a 1.6W module with a fine spot for engraving photos and small details. The work area is 400 × 400 mm, with a built-in camera for positioning your design, built-in air assist and an FDA Class 1 safety rating.

Falcon2 Pro 60W Laser Highlights

• 60W cutting power: basswood up to 22 mm, black acrylic up to 30 mm and 0.2 mm stainless steel sheet in a single pass (Creality's figures, with results varying by material and settings).
• An adjustable beam with three power levels, 60, 40 and 22W, set from the software or with a button on the module: full power for faster cutting, and 22W mode for smoother engraving and a narrower kerf.
• An extra 1.6W laser module in the box with a 0.06 × 0.06 mm spot for ultra-fine engraving on photos and small text.
• A 400 × 400 mm work area and a built-in overhead camera that shows the whole area on your computer, so you place your design exactly with a live preview and run several pieces in one batch.
• Built-in air assist with an included pump, with airflow set automatically or manually with a knob: strong air for cleaner cuts and light air for engraving.
• An enclosed frame with an FDA Class 1 rating that stops the laser automatically when the lid opens, and a tinted-glass lid that filters laser light and protects your eyes from its glare while you watch the job.
• Triple monitoring of airflow, flames and lens cleanliness that stops the job at any fault, plus an emergency stop button, a key safety lock, instant shutoff if the machine tilts or tips over, and sensors in 5 directions that stop it if the laser head hits the frame limits.
• Runs over USB-C with no license fee using Creality's Falcon Design Space on Windows and macOS or LaserGRBL on Windows, or with LightBurn (separate license after a 30-day trial), or without a computer from a G-code file on the included TF card.
• An easy-clean drawer collects cutting debris, and simple assembly with the included tools gets the machine ready in about 10 minutes after unboxing, according to Creality.

What's in the Box

• Falcon2 Pro main unit × 1 with protective enclosure parts for simple assembly
• 60W laser module × 1 and 1.6W laser module × 1
• Safety glasses × 1
• Air assist pump × 1 and silicone tube × 1
• Exhaust hose × 1 with clamp × 1
• Power adapter × 1 with power cord (US plug)
• Two basswood test boards: 300 × 300 × 3 mm and 150 × 150 × 2 mm
• Calibration card × 1 and multi-level focus gauge × 1
• USB-C cable × 2 and USB-A to USB-C adapter × 2
• TF card × 1 and card reader × 1
• Safety lock keys × 2
• Oval-head screws × 26
• Allen keys M1.5, M2, M2.5, M3 and M4, open-end wrench × 1 and tweezers × 1
• Anti-static brush × 1, dust-free cloth × 1 and protective lens × 1
• Velcro straps × 3
• User manual and Creality stickers

Technical Specifications

FAQs

Does the machine run on Saudi mains power?

Yes. The external power adapter accepts 100–240V at 50/60 Hz, so the machine runs on Saudi 220V mains directly with no voltage converter. The included cord has a US plug, and a simple grounded plug adapter is all you need with it.

Does the machine come assembled?

The main unit comes ready in the box, and the protective enclosure parts (aluminum rails, brackets and panels) go on in a simple assembly with the included screws and wrenches, with each step explained in the user manual. Creality says the machine is ready to work in about 10 minutes after unboxing.

What's the difference between the included 60W and 1.6W modules?

The 60W module is for cutting and for deep, fast engraving, and you can lower its power to 40 or 22W from the software or with a button on the module, with 22W mode giving smoother engraving and a narrower kerf. The 1.6W module has a 0.06 × 0.06 mm spot for ultra-fine engraving on photos and small text, and you fit it in place of the main module with the machine off.

What do I need to run it safely at home or in a workshop?

The machine is enclosed and rated FDA Class 1; it starts only with the lid and drawer closed, monitors airflow, flames and lens cleanliness, and stops automatically at any fault. To run it safely, place it on a stable surface in a well-ventilated spot away from flammable materials, connect the included exhaust hose to vent smoke outside the room, wear the included safety glasses while it works as Creality recommends, keep a fire extinguisher within reach, stay with it until the job is done, and have children use it only under adult supervision. It works in a room between 5 and 35°C, so an air-conditioned room suits it best in summer.

Do I need a computer to run it?

You need one to prepare the design: create your file on a computer with Falcon Design Space (on Windows 10 or macOS 11 or later) or LaserGRBL (on Windows) with no license fee, or with LightBurn (separate license after a 30-day trial), then run it directly over USB-C with the computer connected, or save it as a G-code file on the included TF card so the machine runs it from its buttons without a computer. The built-in camera works with the software on your computer for previewing and positioning your design.

Are the rotary and smoke purifier included?

No, these are optional Creality accessories sold separately: the Rotary Kit Pro for engraving mugs and cylindrical objects, the smoke purifier and the Risers. The machine engraves and cuts flat materials without them, and the box includes two wood boards so you can try it from day one.

Why choose the Falcon2 Pro 60W from Avloon?

Because the Creality Falcon2 Pro 60W combines 60W cutting power and fine engraving with a 1.6W module in one enclosed machine, with a 400 × 400 mm work area and a camera that puts your design right where it belongs, plus Class 1 protection and triple monitoring for more peace of mind at home or in the workshop. If you have a question before ordering, message us and we'll be happy to help. Order the Creality Falcon2 Pro 60W Laser from Avloon now and start your engraving and cutting projects.