Creality K3 Multi-Material, Multi-Color 3D Printer with 4 Nozzles

Creality K3 is Creality's newest flagship printer, built around a KliTek system of four independent nozzles: when a model calls for another color, the printer swaps nozzles in about 5 seconds, so color prints finish faster and with far less waste. The Creality K3 prints four colors or four materials in a single part across a 260 × 260 × 260 mm build volume at top speeds of up to 500 mm/s, making it a multi-color 3D printer made for creators of figures, gifts, colorful models and functional parts with easy-to-remove supports.

K3 Highlights

• Four-nozzle KliTek system: each nozzle has its own filament path, and when the color changes, the printer parks the current nozzle and picks up the next one automatically in about 5 seconds.
• Less time, less waste: up to 80% less print time and up to 85% less filament waste than single-nozzle multi-color printing, according to Creality lab data for prints with four colors or fewer.
• Different materials in the same part: each nozzle keeps its own material and temperature, so you can print a PLA model with PETG supports or the other way around, and the supports come away easily, leaving the model's surface clean.
• Room and speed: the full 260 × 260 × 260 mm build volume stays available with all four nozzles, with top speeds of 500 mm/s and acceleration up to 20,000 mm/s² on CoreXY motion.
• Precision built for nozzle swaps: 37 sensors, 12 of them dedicated to monitoring the swap, repeatability under 25 microns after more than 800,000 swaps in Creality's testing, and automatic nozzle offset calibration.
• Steady, powerful extrusion: direct drive with hardened steel gears and a Step-Servo motor with FOC control, nozzles that reach 300°C, and a PEI bed that heats up to 100°C.
• Smart monitoring: a 720p AI camera checks the build plate for foreign objects before printing starts and detects spaghetti failures, pausing the print and alerting you.
• Easier maintenance: each nozzle is a self-contained module with a USB-C connector, and you replace it on its own by removing just two screws.
• Effortless filament loading: an RFID reader recognizes Creality's RFID-tagged spools and sets them up for you, and the CFS nano unit loads and unloads filament automatically.

What's in the Box

• K3 printer × 1
• CFS nano unit for automatic filament loading and unloading × 1, with its mounting bracket × 1
• Filament spool holders × 4
• Side PTFE tube holders × 2
• 0.4 mm nozzle modules × 4 (each with its connection cable, PTFE tube and cable holder)
• Short PTFE tubes × 5 (including 1 spare)
• 485 communication cable × 1 and print head communication cable × 1
• Build plate × 1
• Power cable × 1
• Waste chute × 1
• Lubricating grease × 1
• Tool box: spare print head cutter, H2.5 hex key, nozzle cleaning needle, flush cutters, screw bag and brush
• Creality Cloud card, after-sales service card and quick start guide

This list follows Creality's official manual; Creality notes that accessory types and quantities may change, so the contents of your box are the final reference. Filament spools are sold separately so you can choose your own colors and materials, and the spools shown in the photos are for illustration only.

Technical Specifications

FAQs

How does the KliTek system work, and what does it do for you?

On single-nozzle multi-color printers, every color change means the printer pulls back the filament, loads the new color, then pushes some of it through to purge what is left of the previous one, and all of that takes time and wastes filament. The K3 has four nozzles, one ready for each color or material, so the printer parks the current nozzle and picks up the next in about 5 seconds. The result is faster color printing with less waste: up to 80% less time and up to 85% less filament waste according to Creality, for prints with four colors or fewer.

Does it run on Saudi 220V mains?

Yes, with no voltage converter. The official operating voltage is 100–127V and 200–240V at 50/60Hz, so it runs on Saudi 220V power directly, and a simple grounded three-prong plug adapter with the included power cable is all you need. Use a grounded outlet as Creality's manual recommends, since the printer draws up to 950W at 200–240V.

Which materials does it print?

It prints PLA, PETG, PET, PCTG, PLA-CF, PLA-GF, PETG-CF, PETG-GF and TPU 95A at 1.75 mm, and you can combine two or more materials in the same part. Creality adds engineering materials such as ABS, ASA, PC and PA with the optional Top Cover that closes the chamber, and softer TPU grades and water-soluble PVA supports with the TPU Kit; both are separate optional accessories Creality has not released yet, and every material listed above prints without them.

Do I need to buy filament?

Yes, filament spools are sold separately, so you choose the colors and materials that suit your work. The four holders take 1 kg spools in the sizes listed in the specifications table, and the RFID reader recognizes Creality's RFID-tagged spools and sets the material type, color and print settings automatically.

How many colors can it print in one part?

Up to four colors or four materials in a single part, each with its own nozzle. For more shades, load four CMYK spools and Creality Print blends the layers to bring out many additional shades; Creality notes that these blends are close approximations rather than exact matches for every color.

Do I need a computer connected to the printer while it works?

No. Prepare the file in Creality Print 7.0 or later on your computer (or in OrcaSlicer), then send it wirelessly over Wi-Fi or through the Creality Cloud app, or copy it to a USB drive. The 8GB internal storage keeps your files on the printer.

Why choose the Creality K3 from Avloon?

If you want a four-nozzle 3D printer that combines different colors and materials in one part, without a long wait at every swap and with far less filament waste, the Creality K3 gives you exactly that, along with a 260 × 260 × 260 mm build volume, high speed and smart monitoring in a single machine. If you have a question before ordering, message us and we'll be glad to help. Order the Creality K3 now from Avloon and start printing your color models with confidence.