Creality Ender-3 V3 Mega Combo 3D Printer with CFS nano Unit

The Creality Ender-3 V3 Mega Combo is a bundle that pairs the printer's massive 420 × 420 × 420 mm build volume with the 4-slot CFS nano filament unit, so you print large models in one piece and in four colors automatically once your filament spools are loaded. It's built for makers of large models, batch production and design studios: a high-rigidity metal gantry with dual Z-axis and dual Y-axis motors, speeds up to 500 mm/s, and 81-point auto leveling. It runs directly on Saudi Arabia's 220V power, and a simple grounded plug adapter is all it needs.

Ender-3 V3 Mega Combo Highlights

• Massive 420 × 420 × 420 mm build volume: print large models in one piece, on a build surface about 96% larger than the Ender-3 V3 Plus, according to Creality.
• Four colors automatically with the included CFS nano unit: load four spools and the colors switch mid-print without you lifting a finger.
• Smarter filament management: printing continues automatically from a backup spool when one runs out, Creality RFID filament is recognized so its settings are applied for you, and you get an alert when filament is running low.
• Batch production: fit more parts on a single plate and cut down on repeat print runs — ideal for print farms, design studios, cosplay props and furniture parts.
• Stability on big jobs: a high-rigidity metal gantry, dual Z-axis motors with vibration compensation, and dual Y-axis motors, at up to 500 mm/s (300 mm/s typical).
• Flexible TPU from 85A to 95A: the Sprite 2 direct-drive extruder grips harder over a shorter feed path, and the TPU spool feeds straight into the print head.
• A steady first layer across the large plate: 81-point auto leveling, with the option to level only the print area.
• Protection for your print: a filament runout sensor, Hall-effect tangle detection that stops the print when feeding snags, power-loss recovery, and automatic filament unloading that heats and cuts the filament for you.
• Tool-free quick-swap nozzle: 0.4 mm, compatible with 0.2, 0.6 and 0.8 mm nozzles (available separately), reaching up to 300°C, with a bed that heats up to 100°C.

What's in the Box

• Ender-3 V3 Mega printer in main sections that assemble easily: the base with the build plate and touchscreen, and the gantry with the X axis and print head.
• Two diagonal braces that secure the gantry to the base.
• 4-slot CFS nano unit on its own stand.
• PTFE tubes to connect the CFS nano unit to the print head, plus the cable that links the unit to the printer.
• Power cable.
• Assembly screws, a hex key set, a nozzle cleaning needle, and cable clips for tidy routing.
• Creality Cloud activation card and quick start guide.

Creality has not yet published an official contents list for the Combo version, so this list is based on the printer manual and the official bundle photos, and some accessories may differ. Filament is sold separately so you can pick your own colors and materials, and the spools shown in the photos are for illustration only.

Technical Specifications

FAQs

What's the difference between the Ender-3 V3 Mega on its own and the Combo?

The printer is identical in both versions: same build volume, speed, auto leveling and direct-feed TPU printing. The difference is that the Combo comes with the 4-slot CFS nano unit, so it prints in four colors automatically, continues from a backup spool when one runs out, recognizes Creality RFID filament, and alerts you when filament is running low. The printer on its own prints in one color and switches automatically to a backup spool through its built-in Y-Flow filament relay. So if your work is in color, the Combo is the right fit for you.

Does it run on Saudi power?

Yes. Its official operating voltage is 100–240V at 50/60 Hz, so it runs directly on Saudi Arabia's 220V power with no voltage converter; a simple grounded three-pin plug adapter with the included power cable is all you need. The CFS nano unit draws its power from the printer through a single cable, so one outlet powers the whole bundle. And because the printer is rated at 1,150W, plug it straight into a grounded outlet rather than a thin extension lead.

Can it print flexible TPU?

Yes. It prints TPU from 85A to 95A hardness thanks to the Sprite 2 extruder's stronger grip and shorter path. The TPU spool feeds straight into the print head rather than through the CFS nano unit, so print TPU in a single color and keep the CFS nano unit for your multi-color work. Direct feeding just needs a spool holder mounted on the gantry.

Is filament included with the printer?

No. Filament is sold separately, so you choose the colors and materials that suit your projects. The printer uses 1.75 mm filament, Creality recommends PLA, PETG and TPU, and each slot in the CFS nano unit holds a spool of up to 1 kg within the sizes listed in the specifications table.

Does the printer need assembly?

Yes, a simple assembly following the quick start guide: the gantry bolts onto the base with the included screws, the two diagonal braces go on and the cables are connected, then the CFS nano unit links to the printer with its cable and PTFE tubes. Place the printer where there's enough room in front and behind, since the bed moves front to back, then switch it on — 81-point auto leveling takes care of the rest with no manual adjustment from you.

Can I monitor prints remotely?

Yes. Send your files and follow print progress wirelessly over Wi-Fi and the Creality Cloud app, or print from a USB drive. The printer has no built-in camera, so if you want a live remote view, add the optional Creality Nebula Camera, which the printer supports.

Why Choose the Ender-3 V3 Mega Combo from Avloon?

If you're looking for a large 3D printer that produces big models in one piece and in color, the Creality Ender-3 V3 Mega Combo is a four-color 3D printer that brings a large build volume, the CFS nano unit and auto leveling together in one bundle. If you have any questions before ordering, message us — we're happy to help. Order it now from Avloon and start your big projects with confidence.