Creality Ender-3 V4 Combo 3D Printer with CFS Unit

The Creality Ender-3 V4 Combo is a bundle that pairs the Ender-3 V4 with the 4-slot CFS smart filament unit, so it prints in four colors automatically as soon as four filament spools are loaded into the unit, with no manual swapping. It's designed for beginners and anyone who wants colorful models at home or in the office: one-tap fully automatic calibration, speeds up to 500 mm/s, and noise as low as 47 dB in quiet mode (Creality lab data). It runs directly on Saudi Arabia's 220V power, and a simple grounded plug adapter is all it needs.

Ender-3 V4 Combo Highlights

• Four colors automatically by loading four filament spools into the included CFS unit, and up to 16 colors when you add three more CFS units, available separately.
• Print speeds up to 500 mm/s and acceleration up to 12,000 mm/s², with ±0.1 mm dimensional accuracy per 100 mm.
• One-tap fully automatic calibration: automatic Z-offset, smart leveling of just the print area, and Input Shaping to reduce vibration.
• Easy filament loading and unloading: with the dual-gear direct-drive extruder you simply insert or pull the filament, and the CFS unit feeds and retracts it on its own and automatically recognizes RFID-tagged filament spools.
• Greater stability thanks to a one-piece die-cast aluminum gantry with no joints, which reduces vibration and wobble.
• Comfortable for home and office: noise drops to 47 dB in quiet mode (Creality lab data), thanks to quiet motors, balanced fans and a sound-absorbing frame.
• 0.4 mm quick-swap nozzle behind a magnetic cover that comes off in seconds, making it easy to reach and replace.
• Built-in camera with a privacy cover for monitoring prints and capturing time-lapse videos.
• Protection for your work: filament runout and tangle detection, automatic switching to another spool of the same type and color in the CFS unit, and power-loss recovery.

What's in the Box

• Ender-3 V4 printer: the base with the heated bed, and the top gantry that mounts onto it during assembly.
• 4-slot CFS unit with the Filament Buffer, two Creality 485 cables (45 cm and 100 cm), and PTFE tubes to connect it to the printer.
• Spool holder with its spindle.
• Power cable.
• Filament sample for testing.
• Tools and accessories: hex key, side cutter, nozzle cleaner, nozzle wiping strip, and two plastic plugs.
• Assembly screws: M3×25 (2 pcs), M3×8 (2 pcs) and M4×10 (6 pcs).
• Quick installation guides for the printer and the CFS unit, plus two after-sales service cards.
• This list comes from Creality's two official manuals for the printer and the CFS unit, and some small accessories may vary slightly by production batch.

Technical Specifications

FAQs

What's the difference between the Ender-3 V4 on its own and the Combo?

The Combo is the same printer bundled with a 4-slot CFS unit, the Filament Buffer and the connecting cables, so it prints in four colors automatically. The printer on its own prints in one color from the top spool holder, and Creality officially supports adding a CFS unit to it later (available separately).

How many colors can I print in a single piece?

Four colors with the included CFS unit, and up to 16 colors when you connect four CFS units (the three extra units are available separately). The printer uses a single nozzle with a filament cutter, so it purges a small amount of filament at each color change to keep the colors clean and unmixed.

Does it run on Saudi power?

Yes. The printer's official operating voltage is 100–240V at 50/60 Hz, so it runs directly on Saudi Arabia's 220V power with no voltage converter; a simple grounded three-pin plug adapter with the included power cable is all you need. The CFS unit draws its power from the printer itself, so one outlet powers the whole bundle.

Can TPU be printed through the CFS unit?

No — the CFS unit is designed for rigid materials such as PLA, PETG, ABS, ASA, PET and PLA-CF and doesn't feed flexible ones, so print TPU 95A from the printer's top spool holder in a single color and keep the CFS unit for your multi-color work.

Does the printer need assembly?

Yes, a quick and simple assembly: the top gantry fixes onto the base with the included screws and tools, the spool holder goes on and the screen turns to face forward, and the CFS unit connects to the printer through the Filament Buffer, the two Creality 485 cables and the PTFE tubes as shown in the included guide. The printer then runs a self-test and automatic calibration on first start-up.

Is filament included with the printer?

A small filament sample is included for testing, and you buy your filament separately, so you choose exactly what you need: the printer uses 1.75 mm filament in the supported materials, and each slot in the CFS unit holds a 1 kg spool within the sizes listed in the specifications table.

Why Choose the Ender-3 V4 Combo from Avloon?

If you want to start 3D printing in color, the Creality Ender-3 V4 Combo gives you an easy-to-calibrate printer and a four-color CFS unit in one order, and it officially supports expanding to 16 colors by adding three CFS units, available separately. If you have any questions before ordering, message us — we're happy to help. Order it now from Avloon and start your color projects with confidence.