Creality SPARKX i7 Nano Combo 3D Printer with CFS nano Unit for Up to 4 Colors

The Creality SPARKX i7 Nano Combo 3D printer prints up to 4 colors in a single part automatically, through the compact CFS nano filament unit on top of the printer and two spool holders on either side of the frame, so the whole setup is no wider than 550 mm. It combines a 260 × 260 × 255 mm build volume, speeds up to 500 mm/s and automatic calibration before every print, and its interface supports Arabic, making it a great fit for anyone who wants color printing at home or in the office in less space. It runs on Saudi 220V power directly.

SPARKX i7 Nano Combo Highlights

• Print up to 4 colors in a single part automatically through the 4-slot CFS nano unit, which switches filament on its own.
• Less space on your desk: the whole setup is just 550 mm wide, 37% narrower than other 876 mm-wide setups, according to Creality's comparison.
• Long prints without interruption: automatic filament loading and unloading, plus an automatic switch to a backup spool loaded in another slot when the current spool runs out.
• Speeds up to 500 mm/s and acceleration up to 10,000 mm/s², with Input Shaping and Pressure Advance for cleaner edges and corners.
• Automatic calibration before every print, covering bed leveling, Z-offset and Input Shaping, so there is nothing to adjust by hand.
• 720p AI camera with built-in lighting that detects failed prints and air printing and verifies the build plate, with a rotating privacy cover.
• Tool-free nozzle swaps in about 5 seconds with a quick-swap hotend that reaches 300°C; a 0.4 mm nozzle hotend is included, and the printer also takes 0.2, 0.6 and 0.8 mm hotends (available separately).
• Quiet 45 dB operation in Night Mode, ideal for the home, the office and overnight printing.
• The AI-powered CubeMe feature turns your portrait photo into a print-ready 3D model; the photo is processed in Creality's private cloud and deleted once the model is generated, so all it takes is an internet connection.

What's in the Box

• SPARKX i7 printer
• CFS nano filament unit
• CFS nano mounting base and spool holder set
• CFS cable (RS 485), 1 m
• PTFE tube set for the CFS nano unit (12 pieces)
• Dual-sided textured golden PEI build plate
• 10 m filament sample
• Power cable
• Scraper and H2.0 and H2.5 Allen keys
• Printer quick start guide and CFS nano quick start guide
• After-sales service guide and safety instructions

Contents are based on Creality's official list; some small accessories or their packaging may vary.

Filament is sold separately, and the included 10 m sample gets you started. For multi-color printing, load one spool per color (up to 4 spools) of 1.75 mm PLA, PETG or PLA-CF filament, in spools that fit the CFS nano unit: 32–70 mm inner diameter, up to 220 mm outer diameter and 10–70 mm wide.

Technical Specifications

FAQs

What is the difference between the SPARKX i7 Nano Combo and the SPARKX i7 Color Combo?

Both editions use the same SPARKX i7 printer, and both print up to 4 colors. The Nano Combo comes with the compact CFS nano unit on top of the printer and two spool holders on either side of the frame, so the setup is no wider than 550 mm and needs only a simple install of the holder and the unit, while the Color Combo comes with the CFS Lite unit and arrives fully assembled, according to Creality. If desk space matters most to you, choose the Nano Combo.

Does it run on Saudi power?

Yes. The official power input is 100–240V AC at 50/60Hz, so it runs on Saudi 220V power directly with no voltage converter, and a simple plug adapter is all you need if your outlet calls for one. The CFS nano unit draws its power from the printer through the CFS cable, so it doesn't need a second outlet.

How many colors does it print, and can I add a second unit?

It prints up to 4 colors in a single part with its one CFS nano unit, the configuration the printer is built for. With auto refill, the printer switches to a backup spool loaded in another slot when the current spool runs out.

Does the printer need assembly?

Yes, just a simple setup: remove the X-axis shipping bracket, place the build plate, install the spool holder and the CFS nano base, then connect the CFS cable and the PTFE tubes. On some units the frame is also fixed to the base with the included screws, and both Allen keys come in the box along with a quick start guide for the printer and another for the unit.

Which materials does it support?

The printer prints PLA, PETG and PLA-CF, and all three run through the CFS nano unit for multi-color printing. It also handles hard TPU (64D or harder) for single-color prints, fed directly without the CFS nano unit. Creality doesn't recommend engineering materials such as ABS, ASA, PC and nylon on this printer because of its open frame, so choose from PLA, PETG and PLA-CF, the materials the printer's manual recommends.

Can I monitor prints remotely?

Yes. The printer connects to 2.4GHz Wi-Fi, and you can follow your print through the 720p camera and the Creality Cloud app, printing and monitoring over your local network or the cloud. You can also set the printer's interface to Arabic, one of its 12 languages.

Why choose the SPARKX i7 Nano Combo from Avloon?

Because the Creality SPARKX i7 Nano Combo brings together printing in up to 4 colors, a 260 × 260 × 255 mm build volume and automatic calibration in a setup no wider than 550 mm, with quiet operation and an Arabic interface, and Creality has tested it to keep full performance at a 40°C ambient temperature. If you have a question before ordering, message us and we'll be glad to help. Order the SPARKX i7 Nano Combo now from Avloon and start printing in color.