xTool F2 Ultra UV — 5W UV Laser for Engraving Inside Glass

QAR 23,473.03 QAR 31,330.03-15% OFFVAT included

A 355 nm ultraviolet laser that engraves by cold processing — no burning and no scorched edges on glass, acrylic and plastic — and engraves inside a block of glass to 0.001 mm. It runs on 220 V directly.

Bundle

Clear

100% Secure Payment

Brand

Specifications

Weight	28 g
Dimensions	35 × 49 × 58 in
Brand	xTool
Bundle	Machine Only, With Conveyor, Deluxe

Product Details

xTool F2 Ultra UV — Engraves Inside Glass With No Burning and No Scorched Edges

Ordinary laser machines engrave with heat, so they leave burnt edges on glass, acrylic and plastic and need polishing afterwards. The 355 nm ultraviolet laser in the xTool F2 Ultra UV works instead by cold processing: it breaks the bonds of the material rather than melting it, so the piece comes out clean the first time. And with a dedicated lens it can engrave inside the block of glass itself, to an accuracy of 0.001 mm — a hundred times finer than a hair.

xTool F2 Ultra UV Highlights

Cold processing at a 355 nm wavelength: no burning, no yellowing and no scorched edges — on glass, acrylic, plastic and ceramic.
Engraving inside glass: two lenses — one for the surface and one for the interior — turn a photo or a 3D model into an engraving inside the block.
0.001 mm accuracy: a hundred times finer than conventional laser machines, for detail the naked eye cannot see.
15,000 mm/s speed: commercial production, not a hobby.
Two 48MP cameras: they see the piece and place the design exactly where it belongs.
Works on what others cannot: glass · acrylic · plastic · ceramic · fabric · leather.
110–240V: it runs on Gulf 220 V mains directly, with no transformer.

Full Technical Specifications

Laser Type	5W ultraviolet (UV) · 355 nm wavelength
Work Area	220 × 220 mm (8.6 × 8.6 inches)
Maximum Speed	15,000 mm/s
Vector Accuracy	0.001 mm
Cameras	Two 48MP cameras
Lenses	A lens for surface engraving · and a lens for engraving inside glass
Materials	Glass · acrylic · plastic · ceramic · fabric · leather · wood
Supported Files	SVG · DXF · JPG · JPEG · GIF · PNG · BMP · WEBP
Voltage and power	110–240V · 50/60Hz · 348W
Machine Dimensions	294 × 429 × 520 mm (11.6 × 16.9 × 20.5 inches)
Device Weight	22.5 kg (49.6 lb)
Warranty	12 months from the manufacturer on the main parts, and 3 months on wear parts

FAQs

Does it run on our 220 V power?
Yes. It accepts 110 to 240 V, so you plug it in directly with no transformer. It arrives with a US plug, so a simple plug adapter is all it takes to run it on a Gulf outlet.

What is the difference between it and a fiber or CO2 laser?
Fiber and CO2 engrave with heat, so they burn the edges of glass and acrylic. UV works cold, so the engraving comes out clean with no yellowing and no polishing afterwards — and that is what makes it the choice for glass and plastic in particular.

Does it engrave metal?
It does work on metal, but its strongest field is non-metal: glass, acrylic, plastic and ceramic. If your main work is on metal, the F2 Ultra with the MOPA laser is the better fit.

What is engraving inside glass good for?
It creates three-dimensional models inside a clear block of glass — keepsakes, gifts and awards that sell at a high margin, and the only people who can compete with you on them are those who own a machine like it.

Browse the rest of the electronic cutting machines at Avloon.